Carlos Jiménez
2014-09-12 19:30:19 UTC
Hello,
I recently installed the Kali Linux distro with airprobe and kalibrate
tools on a Lenovo laptop. I'm trying to get some GSM data on wireshark
using the gsm_receive_rtl.py module with a RTL2832 dongle. But I get
nothing.
However the RTL2832 it works ok with rtl_test command, and also works
with kalibrate and the go.sh shows correctly the decoded data from the
capture.cfile provided in the related tutorials.
So, Where is the problem?
By the way, I couldn't install arfcncalc. And also, in the airprobe
installation an error in the make command came out: the libsdrrtl was
missing. I installed directly by the dpkg command because the repo
configured couldn't locate it, and then the problem was solved.
Thanks in advanced.
I recently installed the Kali Linux distro with airprobe and kalibrate
tools on a Lenovo laptop. I'm trying to get some GSM data on wireshark
using the gsm_receive_rtl.py module with a RTL2832 dongle. But I get
nothing.
However the RTL2832 it works ok with rtl_test command, and also works
with kalibrate and the go.sh shows correctly the decoded data from the
capture.cfile provided in the related tutorials.
So, Where is the problem?
By the way, I couldn't install arfcncalc. And also, in the airprobe
installation an error in the make command came out: the libsdrrtl was
missing. I installed directly by the dpkg command because the repo
configured couldn't locate it, and then the problem was solved.
Thanks in advanced.